Valenti Toyota 86 (ZN6)/Subaru BRZ (ZC6) Jewel LED Tail Lamp ULTRA
Released a new model "ULTRA" equipped with opening and ending action on the jewel LED tail lamp.
Compatible models are Toyota 86 (ZN6) / Subaru BRZ (ZC6), and the newly designed tail lamps have opening and ending actions.
■ Equipped with opening and ending action function *
This is a function that is also installed in the tail lamps of European cars, etc., and the tail lamp lights up in motion when locking or unlocking.
It attracts the eyes of the surroundings with its attention-grabbing features.
* Connection to constant power supply and ignition power supply is required for the operation of the function.
■Sequential blinker (flowing blinker) adoption!
Adopted "sequential blinker" that complies with safety standards in Japan due to revision of law!
Of course, it also complies with safety standards, and the setting of "flow" or "no flow" can be easily changed by the wiring connection method on the back side of the tail lamp body.
■European-style side marker lighting!
Adopted side marker lighting that incorporates the taste of European cars (position-linked lighting)
■ Selectable position lighting mode
Equipped with a turn signal position mode that allows position lighting of the turn signal part, you can select the lighting pattern.
It is possible to switch on / off by wiring connection on the back side of the tail lamp body.
■Adopted outer lens shape and rectifying fin that imaged genuine tail lamp!
Outer lens shape and rectifying fins are used to make the image of a genuine tail lamp.
■We adopt both sides total 154 LED & 2 LED light bar!
The position lamp lighting with the 3D shaped LED light bar creates a fantastic rear view and catches the eyes of the following vehicles.
An all-LED model that uses high-brightness LEDs for all positions/brakes and blinkers.
An inner lens is used so that the LED chip cannot be seen directly, giving a stylish impression even when the light is off.
■Two colour variations that you can choose according to your body colour and preference!
■Built-in high flash control resistor!
Built-in high flash control resistance in the tail body, no worries about high flash phenomenon!
Mounting is a coupler on type that uses a genuine coupler.
■Compatible models
●Toyota 86 / Model: ZN6 / Year: 2012.4 - 2021.7 Early Late Model / All Grades
●Subaru BRZ / Model: ZC6 / Year: 2012.3 - 2020.11 Early Late Model / All Grades
Note: When connecting the OEA function, vehicles with external security or external turn signal control relay may not work properly.
Operation of the OEA function requires connection to a constant power supply, ignition power supply.
■ Standard install time 3.5 hours
*Although we try to reproduce the actual product in the photos on our website as much as possible, it may differ from the image of the product depending on your monitor settings. note that.
Product specifications and designs are subject to change without notice.
Please note: The listed price does not include shipping, you will be quoted shipping after sale. For a quote beforehand please contact us! sales@hypernightracing.com
Japan Stock! This item is a special order! Please expect delays for product delivery. Cancellation of these made-to-order items will incur a 20% restocking fee.
Released a new model "ULTRA" equipped with opening and ending action on the jewel LED tail lamp.
Compatible models are Toyota 86 (ZN6) / Subaru BRZ (ZC6), and the newly designed tail lamps have opening and ending actions.
■ Equipped with opening and ending action function *
This is a function that is also installed in the tail lamps of European cars, etc., and the tail lamp lights up in motion when locking or unlocking.
It attracts the eyes of the surroundings with its attention-grabbing features.
* Connection to constant power supply and ignition power supply is required for the operation of the function.
■Sequential blinker (flowing blinker) adoption!
Adopted "sequential blinker" that complies with safety standards in Japan due to revision of law!
Of course, it also complies with safety standards, and the setting of "flow" or "no flow" can be easily changed by the wiring connection method on the back side of the tail lamp body.
■European-style side marker lighting!
Adopted side marker lighting that incorporates the taste of European cars (position-linked lighting)
■ Selectable position lighting mode
Equipped with a turn signal position mode that allows position lighting of the turn signal part, you can select the lighting pattern.
It is possible to switch on / off by wiring connection on the back side of the tail lamp body.
■Adopted outer lens shape and rectifying fin that imaged genuine tail lamp!
Outer lens shape and rectifying fins are used to make the image of a genuine tail lamp.
■We adopt both sides total 154 LED & 2 LED light bar!
The position lamp lighting with the 3D shaped LED light bar creates a fantastic rear view and catches the eyes of the following vehicles.
An all-LED model that uses high-brightness LEDs for all positions/brakes and blinkers.
An inner lens is used so that the LED chip cannot be seen directly, giving a stylish impression even when the light is off.
■Two colour variations that you can choose according to your body colour and preference!
■Built-in high flash control resistor!
Built-in high flash control resistance in the tail body, no worries about high flash phenomenon!
Mounting is a coupler on type that uses a genuine coupler.
■Compatible models
●Toyota 86 / Model: ZN6 / Year: 2012.4 - 2021.7 Early Late Model / All Grades
●Subaru BRZ / Model: ZC6 / Year: 2012.3 - 2020.11 Early Late Model / All Grades
Note: When connecting the OEA function, vehicles with external security or external turn signal control relay may not work properly.
Operation of the OEA function requires connection to a constant power supply, ignition power supply.
■ Standard install time 3.5 hours
*Although we try to reproduce the actual product in the photos on our website as much as possible, it may differ from the image of the product depending on your monitor settings. note that.
Product specifications and designs are subject to change without notice.
Please note: The listed price does not include shipping, you will be quoted shipping after sale. For a quote beforehand please contact us! sales@hypernightracing.com
Japan Stock! This item is a special order! Please expect delays for product delivery. Cancellation of these made-to-order items will incur a 20% restocking fee.
Released a new model "ULTRA" equipped with opening and ending action on the jewel LED tail lamp.
Compatible models are Toyota 86 (ZN6) / Subaru BRZ (ZC6), and the newly designed tail lamps have opening and ending actions.
■ Equipped with opening and ending action function *
This is a function that is also installed in the tail lamps of European cars, etc., and the tail lamp lights up in motion when locking or unlocking.
It attracts the eyes of the surroundings with its attention-grabbing features.
* Connection to constant power supply and ignition power supply is required for the operation of the function.
■Sequential blinker (flowing blinker) adoption!
Adopted "sequential blinker" that complies with safety standards in Japan due to revision of law!
Of course, it also complies with safety standards, and the setting of "flow" or "no flow" can be easily changed by the wiring connection method on the back side of the tail lamp body.
■European-style side marker lighting!
Adopted side marker lighting that incorporates the taste of European cars (position-linked lighting)
■ Selectable position lighting mode
Equipped with a turn signal position mode that allows position lighting of the turn signal part, you can select the lighting pattern.
It is possible to switch on / off by wiring connection on the back side of the tail lamp body.
■Adopted outer lens shape and rectifying fin that imaged genuine tail lamp!
Outer lens shape and rectifying fins are used to make the image of a genuine tail lamp.
■We adopt both sides total 154 LED & 2 LED light bar!
The position lamp lighting with the 3D shaped LED light bar creates a fantastic rear view and catches the eyes of the following vehicles.
An all-LED model that uses high-brightness LEDs for all positions/brakes and blinkers.
An inner lens is used so that the LED chip cannot be seen directly, giving a stylish impression even when the light is off.
■Two colour variations that you can choose according to your body colour and preference!
■Built-in high flash control resistor!
Built-in high flash control resistance in the tail body, no worries about high flash phenomenon!
Mounting is a coupler on type that uses a genuine coupler.
■Compatible models
●Toyota 86 / Model: ZN6 / Year: 2012.4 - 2021.7 Early Late Model / All Grades
●Subaru BRZ / Model: ZC6 / Year: 2012.3 - 2020.11 Early Late Model / All Grades
Note: When connecting the OEA function, vehicles with external security or external turn signal control relay may not work properly.
Operation of the OEA function requires connection to a constant power supply, ignition power supply.
■ Standard install time 3.5 hours
*Although we try to reproduce the actual product in the photos on our website as much as possible, it may differ from the image of the product depending on your monitor settings. note that.
Product specifications and designs are subject to change without notice.
Please note: The listed price does not include shipping, you will be quoted shipping after sale. For a quote beforehand please contact us! sales@hypernightracing.com
Japan Stock! This item is a special order! Please expect delays for product delivery. Cancellation of these made-to-order items will incur a 20% restocking fee.
