Kuhl Racing Subaru WRX VAB-GTⅠ Aero Kit Ver1
VAB WRX-STI&S4 (Early model/Types A to C) Aero parts <KUHLRACING VAB-GTI>
・The front diffuser has a simple style attached to the lower part of the genuine bumper, but by greatly extending it forward, it creates a sporty silhouette. Considering the extension to the front, it is kept 20mm lower than the genuine bumper to secure the ground clearance. We achieved thin wall thickness to the limit while ensuring high strength.
・The side steps are designed to create a sense of unity with the body with extended fender lines and aerodynamics, but they also feature deep depth. In addition, it is a side step that secures high cost and high strength by moulding even the back side so that it can be easily installed and high strength for high speed driving. The ground clearance is kept at 15mm lower than the genuine side step.
・An under diffuser has been added to the side step. The side step diffuser has a high strength finish while achieving the thinnest wall thickness possible. Additional installation is recommended for those seeking a more aggressive style.
・The rear section is divided into two parts, the rear bumper and the rear floating diffuser, to achieve an impactful rear view. The rear bumper has a large opening and features an aggressive design that dares to show off the genuine back panel.
・A sporty visual effect is achieved by the diffuser shape designed in a different style on the upper part of the lower part of the rear bumper. Special products are available for back fog. Ducts are installed on both sides of the bumper, and a press line is provided in the centre to create a sporty rear view.
・The rear diffuser adopts a floating (hanging) shape with aerodynamics in mind, and its significant extension and curvature toward the rear creates an impactful racing-style rear view. Thin and thick vertical fins are laid out on both sides to enhance sportiness.
─BASIC KIT Contents─
Front diffuser
Side steps
Rear bumper
Rear floating diffuser
─Aero material──
Aero material is 1.5 times as much as conventional FRP material We use KUHL's original material SG (strong grade), which boasts the strength and thickness of Not only the strength of the material is increased, but also reinforcement material is put in each part, so it is a high-strength aero part that can withstand a speed range of 300 km or more. CB (carbon) material can also be selected for some products.
> FRPSG (strong grade) type
Boasting 1.5 times the strength and thickness of conventional FRP material, the standard setting grade of KUHL BODY KIT.
── Request to contact ──
・If you want a painted product, please be sure to tell us the desired colour code.
・Due to the colour coded painting, it may differ slightly from the vehicle it is installed on.
Notes on purchasing:
*The aero material is FRP black gel.
*Prices and specifications are subject to change without notice.
*Shipping fee will be charged separately.
Please note: The listed price does not include shipping, you will be quoted shipping after sale. For a quote beforehand please contact us! sales@hypernightracing.com
Japan Stock! This item is a special order! Please expect delays for product delivery. Cancellation of these made-to-order items will incur a 20% restocking fee.
VAB WRX-STI&S4 (Early model/Types A to C) Aero parts <KUHLRACING VAB-GTI>
・The front diffuser has a simple style attached to the lower part of the genuine bumper, but by greatly extending it forward, it creates a sporty silhouette. Considering the extension to the front, it is kept 20mm lower than the genuine bumper to secure the ground clearance. We achieved thin wall thickness to the limit while ensuring high strength.
・The side steps are designed to create a sense of unity with the body with extended fender lines and aerodynamics, but they also feature deep depth. In addition, it is a side step that secures high cost and high strength by moulding even the back side so that it can be easily installed and high strength for high speed driving. The ground clearance is kept at 15mm lower than the genuine side step.
・An under diffuser has been added to the side step. The side step diffuser has a high strength finish while achieving the thinnest wall thickness possible. Additional installation is recommended for those seeking a more aggressive style.
・The rear section is divided into two parts, the rear bumper and the rear floating diffuser, to achieve an impactful rear view. The rear bumper has a large opening and features an aggressive design that dares to show off the genuine back panel.
・A sporty visual effect is achieved by the diffuser shape designed in a different style on the upper part of the lower part of the rear bumper. Special products are available for back fog. Ducts are installed on both sides of the bumper, and a press line is provided in the centre to create a sporty rear view.
・The rear diffuser adopts a floating (hanging) shape with aerodynamics in mind, and its significant extension and curvature toward the rear creates an impactful racing-style rear view. Thin and thick vertical fins are laid out on both sides to enhance sportiness.
─BASIC KIT Contents─
Front diffuser
Side steps
Rear bumper
Rear floating diffuser
─Aero material──
Aero material is 1.5 times as much as conventional FRP material We use KUHL's original material SG (strong grade), which boasts the strength and thickness of Not only the strength of the material is increased, but also reinforcement material is put in each part, so it is a high-strength aero part that can withstand a speed range of 300 km or more. CB (carbon) material can also be selected for some products.
> FRPSG (strong grade) type
Boasting 1.5 times the strength and thickness of conventional FRP material, the standard setting grade of KUHL BODY KIT.
── Request to contact ──
・If you want a painted product, please be sure to tell us the desired colour code.
・Due to the colour coded painting, it may differ slightly from the vehicle it is installed on.
Notes on purchasing:
*The aero material is FRP black gel.
*Prices and specifications are subject to change without notice.
*Shipping fee will be charged separately.
Please note: The listed price does not include shipping, you will be quoted shipping after sale. For a quote beforehand please contact us! sales@hypernightracing.com
Japan Stock! This item is a special order! Please expect delays for product delivery. Cancellation of these made-to-order items will incur a 20% restocking fee.
VAB WRX-STI&S4 (Early model/Types A to C) Aero parts <KUHLRACING VAB-GTI>
・The front diffuser has a simple style attached to the lower part of the genuine bumper, but by greatly extending it forward, it creates a sporty silhouette. Considering the extension to the front, it is kept 20mm lower than the genuine bumper to secure the ground clearance. We achieved thin wall thickness to the limit while ensuring high strength.
・The side steps are designed to create a sense of unity with the body with extended fender lines and aerodynamics, but they also feature deep depth. In addition, it is a side step that secures high cost and high strength by moulding even the back side so that it can be easily installed and high strength for high speed driving. The ground clearance is kept at 15mm lower than the genuine side step.
・An under diffuser has been added to the side step. The side step diffuser has a high strength finish while achieving the thinnest wall thickness possible. Additional installation is recommended for those seeking a more aggressive style.
・The rear section is divided into two parts, the rear bumper and the rear floating diffuser, to achieve an impactful rear view. The rear bumper has a large opening and features an aggressive design that dares to show off the genuine back panel.
・A sporty visual effect is achieved by the diffuser shape designed in a different style on the upper part of the lower part of the rear bumper. Special products are available for back fog. Ducts are installed on both sides of the bumper, and a press line is provided in the centre to create a sporty rear view.
・The rear diffuser adopts a floating (hanging) shape with aerodynamics in mind, and its significant extension and curvature toward the rear creates an impactful racing-style rear view. Thin and thick vertical fins are laid out on both sides to enhance sportiness.
─BASIC KIT Contents─
Front diffuser
Side steps
Rear bumper
Rear floating diffuser
─Aero material──
Aero material is 1.5 times as much as conventional FRP material We use KUHL's original material SG (strong grade), which boasts the strength and thickness of Not only the strength of the material is increased, but also reinforcement material is put in each part, so it is a high-strength aero part that can withstand a speed range of 300 km or more. CB (carbon) material can also be selected for some products.
> FRPSG (strong grade) type
Boasting 1.5 times the strength and thickness of conventional FRP material, the standard setting grade of KUHL BODY KIT.
── Request to contact ──
・If you want a painted product, please be sure to tell us the desired colour code.
・Due to the colour coded painting, it may differ slightly from the vehicle it is installed on.
Notes on purchasing:
*The aero material is FRP black gel.
*Prices and specifications are subject to change without notice.
*Shipping fee will be charged separately.
Please note: The listed price does not include shipping, you will be quoted shipping after sale. For a quote beforehand please contact us! sales@hypernightracing.com
Japan Stock! This item is a special order! Please expect delays for product delivery. Cancellation of these made-to-order items will incur a 20% restocking fee.
